SAFETY DATA SHEET
SDS 0621

=============================================================================
            Section 1 -- PRODUCT AND COMPANY IDENTIFICATION                      
-----------------------------------------------------------------------------
                                                           HMIS CODES
PRODUCT NAME                                            Health            2
   RectorSeal Pipe Repair Kit                           Flammability      1
                                                        Reactivity        0
PRODUCT CODES                                           PPI               B
   82112, 82119
CHEMICAL FAMILY
   Organic/Inorganic
USE
   Pipe Wrap 
MANUFACTURER'S NAME                          EMERGENCY TELEPHONE NO.
   The RectorSeal Corporation                 Chemtrec 24 Hours
   2601 Spenwick Drive                        (800)424-9300 USA
   Houston, Texas  77055  USA                 (703)527-3887 International
   
DATE OF VALIDATION                           TECHNICAL SERVICE TELEPHONE NO. 
   January 23, 2015                           (800)231-3345 or (713)263-8001
DATE OF PREPARATION                         
   March 5, 2013
=============================================================================
           Section 2 -- HAZARDS IDENTIFICATION
-----------------------------------------------------------------------------
EMERGENCY OVERVIEW
OSHA Hazards
None
GHS CLASSIFICATION
PHYSICAL HAZARDS:  None
HEALTH HAZARDS  
Acute Toxicity:  
Oral: Not Classified 
Dermal: Not Classified
Inhalation:  Not Classified 
Skin Corrosion/Irritation:  Not Classified 
Serious Eye Damage/Eye Irritation: Not Classified 
Respiratory or Skin Sensitization:  Not Classified
Germ Cell Mutagenicity: Not Classified
Carcinogenicity: Not Classified
Reproductive Toxicology: Not Classified
Target Organ Systemic Toxicity - Single Exposure: Not Classified
Target Organ Systemic Toxicity - Repeated Exposure: Not Classified
Aspiration Toxicity: Not Classified
-----------------------------------------------------------------------------
GHS Label elements, including precautionary statements
Pictogram: None
Signal Word: None
Hazard Statements: 
None
Precautionary Statements:
P102 - Keep out of reach of children.
P262 - Do not get in eyes, on skin, or on clothing.
P264 - Wash hands thoroughly after handling.
P281 Use personal protective equipment as required.  
-----------------------------------------------------------------------------
SUMMARY OF ACUTE HAZARDS
   Prolonged skin or eye exposure may cause irritation, sensitization.
ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS
INHALATION
   N/A 
EYE CONTACT
   May cause slight eye irritation.
SKIN CONTACT
   None known.
INGESTION
   May cause nausea
SUMMARY OF CHRONIC HAZARDS
   None known.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
  None known.  
=============================================================================
           Section 3 -- COMPOSITION/INFORMATION ON INGREDIENTS
-----------------------------------------------------------------------------
INGREDIENT: Isocyanate 4,4 diphenyl methane diisocynate
PERCENTAGE BY WEIGHT: 56
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Tertiary amine
PERCENTAGE BY WEIGHT: 2
CAS#: N/D
EC#:  N/D
-----------------------------------------------------------------------------
INGREDIENT: Benzoyl chloride
PERCENTAGE BY WEIGHT: <1
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Hydroxyl terminated polymer
PERCENTAGE BY WEIGHT: 42
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Silicon 
PERCENTAGE BY WEIGHT: <1
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Fiberglass knit fabric 
PERCENTAGE BY WEIGHT: 84.5
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Sizing/Binder 
PERCENTAGE BY WEIGHT: 1-22
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Surface Binder 
PERCENTAGE BY WEIGHT: 0-6
CAS#: N/D
EC#: N/D
-----------------------------------------------------------------------------
INGREDIENT: Water
PERCENTAGE BY WEIGHT: 0-15
CAS#: 7732-18-5
EC#: 231-791-2
=============================================================================
           Section 4 -- FIRST AID MEASURES
-----------------------------------------------------------------------------
   If INHALED:     If overcome by exposure, remove victim to fresh air
                   immediately.  Give oxygen or artificial respiration as 
                   needed.  Obtain emergency medical attention.  Prompt 
                   action is essential.
   If on SKIN:     Use a rag to remove excess from skin and remove
                   contaminated clothing.  Use of mild solvent, such as 
                   acetone (nail polish remover) or mineral spirits, may help 
                   in removing uncured residue from clothing or other 
                   surfaces (avoid eye contact).  Cured resin may be physically
                   removed by persistent washing with soap and water.  If 
                   irritation develops, use mild skin cream.  If it persists, 
                   obtain medical attention.  
   If in EYES:     Flush eyes with large amounts of water for 15 minutes.
                   Get medical attention if irritation persists. 
   If SWALLOWED:   If swallowed, call a physician immediately.  Only induce 
                   vomiting at the instruction of a physician.  Never give 
                   anything by mouth to an unconscious person.
=============================================================================
           Section 5 -- FIRE FIGHTING MEASURES
-----------------------------------------------------------------------------
EXTINGUSING MEDIA
   Dry chemical, carbon dioxide, halon 1211, chemical foam, or water spray if
used in large quantities (water contamination will produce carbon dioxide).
SPECIAL FIRE FIGHTING PROCEDURES:  Wear self-contained breathing apparatus and 
other protective clothing. 
UNUSUAL FIRE AND EXPLOSION HAZARDS:  At high temperatures MDI vapors 
(diphenylmethane Diisocycanate) may occur; pressure and explosion hazards are 
also present at high temperatures in closed containers.  Hazardous gases generated.
=============================================================================
           Section 6 -- ACCIDENTAL RELEASE MEASURES
-----------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:  If package splits 
or breaks, ensure ventilation is adequate to prevent build up of potentially 
harmful vapors. Scrape up material and place into container for disposal. 
Decontaminate area and equipment with dilute ammonia and detergent. Mix 
additional absorbent into spill and dispose. 
=============================================================================
           Section 7 -- HANDLING AND STORAGE
-----------------------------------------------------------------------------
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:  Store in a cool, dry, 
well ventilated area out of direct sunlight. Store away from all heat
sources. Optimum storage conditions 68 F-86 F. For best results, rotate 
stock.
OTHER PRECAUTIONS: Removal with oscillating saws without adequate ventilation 
will potentially cause irritant dusts to be generated into atmosphere. The 
use of shears is recommended to remove old  product from pipes so as to 
minimize dust formation.
=============================================================================
           Section 8 -- EXPOSURE CONTROLS/PERSONAL PROTECTION
-----------------------------------------------------------------------------
Isocyanate 4,4 diphenyl methane diisocynate
and higher oligomers 
                             ACGIH TLV    0.55 mg/m3                
                             OSHA  PEL     0.2 mg/m3
Tertiary amine
                             ACGIH TLV     N/D ppm                    
                             OSHA  PEL     N/D ppm
Benzoyl chloride
                             ACGIH TLV     N/D ppm                    
                             OSHA  PEL     N/D ppm 
Hydroxyl terminated polymer
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D
Silicon                 
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D 
Fiberglass knit fabric 
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D  
Sizing/Binder 
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D 
Surface Binder 
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D 
Water 
                             ACGIH TLV     N/D
                             OSHA  PEL     N/D
-----------------------------------------------------------------------------							 
RESPIRATORY PROTECTION (SPECIFY TYPE):  NIOSH/MSHA supplied air / SCBA if TLV 
  exceeded.
VENTILATION - LOCAL EXHAUST:  Acceptable 
SPECIAL:  N/A
MECHANICAL (GENERAL):  Acceptable 
OTHER:  N/A
PROTECTIVE GLOVES:  Wear rubber gloves.
EYE PROTECTION:  Safety glasses (ANSI Z-87.1 or equivalent)
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:  Tyvek coveralls recommended.
WORK/HYGIENIC PRACTICES:  Where use can result in skin contact, wash exposed
   areas thoroughly before eating, drinking, smoking, or leaving work area. 
   Launder contaminated clothing before reuse.
=============================================================================
           Section 9 -- PHYSICAL AND CHEMICAL PROPERTIES
-----------------------------------------------------------------------------
BOILING POINT: N/A			
SPECIFIC GRAVITY (H20 = 1):  1.1 (resin)
VAPOR PRESSURE (mm Hg): <10.5
MELTING POINT: 590 F (decomposes)
FREEZING POINT: 50 F
VAPOR DENSITY (AIR = 1): N/A
EVAPORATION RATE (ETHYL ACETATE = 1):  N/A
APPEARANCE/ODOR: Fiberglass tape coated with a viscous liquid / aromatic
SOLUBILITY IN WATER: Insoluble
FLASH POINT:  > 300 F (572 C)
LOWER EXPLOSION LIMIT: N/D
UPPER EXPLOSION LIMIT: N/D 
VOLATILE ORGANIC COMPOUNDS(VOC)Content
(Theoretical Percentage By Weight): 0% or (0 g/L) 
=============================================================================
           Section 10 -- STABILITY AND REACTIVITY 
-----------------------------------------------------------------------------
STABILITY:  Stable  
CONDITIONS TO AVOID: Heat above 200 F.
INCOMPATIBILITY (MATERIALS TO AVOID): Moisture (water), amines, strong bases
and alcohols.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, HCN, MDI,
Nox.
HAZARDOUS POLYMERIZATION: MDI can polymerize and /or decompose and pressure 
buildup.
=============================================================================
           Section 11 -- TOXICOLOGY INFORMATION
-----------------------------------------------------------------------------
CHRONIC HEALTH HAZARDS
   No ingredient in this product is an IARC, NTP or OSHA listed carcinogen.
-----------------------------------------------------------------------------
TOXICOLOGY DATA 
Ingredient Name
-----------------------------------------------------------------------------
    Isocyanate 4,4 diphenyl methane diisocynate
                        and higher oligomers 
                  Oral-Rat LD50: >10,000 mg/kg
                  Inhalation-Rat LC50: 490 mg/cu.m
=============================================================================
           Section 12 -- Ecological Information
-----------------------------------------------------------------------------
ECOLOGICAL DATA 
Ingredient Name
-----------------------------------------------------------------------------
                  Food Chain Concentration Potential: N/D
                  Waterfowl Toxicity: N/D 
                  BOD: N/D 
                  Aquatic Toxicity: N/D 
=============================================================================
           Section 13 -- DISPOSAL CONSIDERATIONS
-----------------------------------------------------------------------------
Waste Classification: Non-Regulated Solid Waste
Disposal Method: Dispose of all waste in accordance with all local, state and 
federal regulations.
=============================================================================
           Section 14 -- TRANSPORTATION INFORMATION
-----------------------------------------------------------------------------
DOT: Non-Regulated  
OCEAN (IMDG): Non-Regulated  
AIR (IATA): Non-Regulated  
WHMIS (CANADA): Non-Regulated  
=============================================================================
           Section 15 -- REGULATORY INFORMATION
-----------------------------------------------------------------------------
REGULATORY DATA
Ingredient Name

                  SARA 313          No
                  TSCA Inventory    All components listed
                  CERCLA RQ         N/A
                  RCRA Code         N/A
=============================================================================
           Section 16 -- OTHER INFORMATION
-----------------------------------------------------------------------------
   This document is prepared pursuant to the OSHA Hazard Communication 
Standard (29 CFR 1910.1200).  The information herein is given in good faith,
but no warranty, expressed or implied is made.  Consult RectorSeal for further
information:  (713) 263-8001