Tagged: sure seal

SureSeal: Eliminate Sewer Gas and Evaporation

[block]0[/block]Using SureSeal Waterless Floor Drain Trap seals to Eliminate Sewer Gas and Evaporation

by Rick Ensley, SureSeal product manager, RectorSeal Corp.

Sewer gas rising from floor drains might be an unhealthy nuisance for commercial building owners and homeowners, but for plumbing service contractors, it should be a breath of fresh air for aftermarket and service call add-on sales that increase profits.

The common cause of sewer odors in floor drains is the evaporation of the gas-blocking water trap seal that prevents sewer gas egress through a floor drain P-trap. It’s especially common with infrequently used drains. Once evaporated, the trap seal is broken leaving nothing to block a steady supply of unfettered sewer gas rising up into the occupant’s breathing zones. Sewer gas is suspected of carrying airborne biological contaminants that can lead to SARS (Coronavirus), Legionnaire’s and other diseases.

Plumbing service contractors have four alternative remedies to this problem and not all of them are foolproof:


12 Oct

Knowing the Difference Between Trap Seals and Trap Primers

Could Save Project Capital and Maintenance Costs

By Rick Ensley

For decades the plumbing industry has depended on water-supplied trap primers for maintaining floor drain trap water levels, thus preventing potentially dangerous and always annoying indoor air quality (IAQ) issues caused by sewer gas infiltration into occupied spaces.

The most common trap primers are connected to a water line and activated via pressure fluctuation from a nearby urinal or water closet flush that maintains trap water levels. Other types divert gray water to the trap from nearby sink drains.

Trap primers’ main disadvantage is maintenance. Like many plumbing fixtures, their supply orifices are easily blocked by scale or corrosion. Cleaning or replacing them can be an expensive proposition, especially when they require floor and wall demolition/repair for access.

Comparatively, the recently-developed waterless barrier-type trap seal protection device circumvents these disadvantages because it’s virtually maintenance-free. Most floor drain trap seals are push-fit, with an EPDM or silicone-based fittings featuring a one-way membrane that acts similar to a check valve. The strong membrane’s tight-seal prevents sewer gas and insect ingress while also protecting against total trap water evaporation for months. Furthermore, the membrane is sensitive enough to open from the weight of just four ounces of water draining from a shower stall or floor wash-down.

Building codes are quickly changing across North America to allow trap seal use in lieu of trap primers. In many jurisdictions, trap seals are allowed as substitutes in retrofit situations where trap primers have failed. Opening and closing floors or walls to replace trap primers can many times cost upwards of $1,000 each, so a trap seal that installs in less than a minute after removing the floor drain grate can represent a significant savings.

New construction is a different story. Trap seals that carry an ASSE-1072 test and certification by a third party test lab may be substituted for trap primers in new construction, depending on the local jurisdiction and its inspectors. Plumbing consulting engineers that still want trap primers in their specifications might consider combining them with trap seals. When the trap primer’s lifecycle ends, the trap seal can still offer the facility sewer gas protection.

It’s the consulting engineer and/or contractor’s responsibility to specify a particular brand they deem as the best and compliant with ASSE-1072. It’s important to specify a brand since some brands don’t meet ASSE-1072’s requirements to withstand the effects of dirt, debris, floor wax and grease-laden waste. Typically the code-compliant models also have a built-in relief valve for eliminating potential air locks between the trap seal and the trap seal device that prevent floor water from draining properly.

There are also some new trap seal models with an added check valve benefit to protect against property-damaging water back-ups ranging up to five feet of head pressure.

Besides minimizing trap water evaporation reduction and maintenance, waterless trap seals are also considered green because they don’t require continual trap water filling, thus they complement water conservation efforts.

Some waterless trap seals are approved or accepted nationally for all retrofit uses. New construction specification depends on jurisdictions that have adopted ASSE-1072.

The following list presents approval levels by state and province:

  • Fully-Approved: Colorado, Connecticut, Illinois, Indiana, Kentucky, Louisiana, Massachusetts, Minnesota, North Carolina, New Jersey, New Mexico, Tennessee, Utah, Wisconsin and District of Columbia. Also Ontario and Quebec;
  • Widely-Approved: Alabama, Arkansas, Arizona, Georgia, Kansas, Missouri, Mississippi, Nevada, New York (except New York City), Pennsylvania, Rhode Island, Texas, and Washington;
  • Partially-Approved: Delaware, Oklahoma, South Carolina, and Virginia;

Some Approval and Currently Considering: Alaska, California, Florida, Hawaii, Iowa, Maine, Maryland, Montana, New England, North Dakota, Oregon, South Dakota, Vermont, West Virginia, Wyoming, Puerto Rico, and most of Canada outside of Ontario and Quebec

09 Oct

Rick’s Tips #1: SureSeal Trap

That SureSeal Trap seals will press fit any 2”, 3’ or 4’ PVC, ABS or Cast Iron pipe or drain without using any glue or silicone? SureSeal also makes a 3.5” SureSeal trap seal that will press fit into any drain with a 3.5” strainer throat.

– Rick Ensley, SureSeal Product Manager

05 Apr

Specifying waterless trap primers to minimize evaporation and conserve water

drains_220By Rick Ensley

Water-efficient toilets, faucets and other plumbing fixtures have become routine specifications in the last decade. However, the next plateau of water conservation for plumbing engineers will be waterless, or floor drain, trap primers.

California’s record-breaking drought brought the water conservation issue to the forefront, especially after Governor Jerry Brown’s 25 percent water reduction mandate. As water shortages gradually become the new normal nationally, water-conserving plumbing products, such as waterless trap primers (sometimes referred to as a barrier-type trap seal protection devices in plumbing codes), will become significant factors in solving water conservation challenges, because they provide 100 percent water-saving efficiency over traditional methods. Building owners will look to plumbing engineers for these types of water-conserving solutions in new construction projects. Meanwhile, maintenance departments and plumbing service contractors will be relied on in facility retrofits.

Since coming on the market as an alternative to potable or fresh water-supplied trap primers, the waterless trap primer’s lure was its ability to prevent floor drain sewer gas ingress into the breathing spaces by minimizing trap evaporation. Most waterless trap primers feature a one-way membrane that acts similar to a check valve. It’s the membrane’s tight-seal that prevents sewer gas and insect ingress, while also minimizing evaporation of the trap seal. Thus, continual replenishment of the trap seal via water-supplied trap primers from the building water supply is not necessary. The membrane is sensitive enough to open from the weight of just 4 ounces of water draining from above in a shower stall or floor wash-down. But, it is strong enough to stay closed and sealed to minimize evaporation and eliminate sewer gas odor.


18 Feb

SureSeal® Vent-Guard


Controls roof vent and grease interceptor odors.

Provides odor control from grease interceptors and roof vents. Also eliminates roof vent blockages from nesting. Can be used on older roof vents.

• Stops roof odors
• Stops grease Interceptor odors
• Stops roof vent pipe nesting
• Simple one-piece installation
• 3 press fit models 2,” 3″, 4″
• Economical

Product Code Size Quantity UPC Interleaved Dimensions
97065 2” 6 021449970655 10021449970652 11x9x6 .34 cu ft
97066 3” 6 021449970662 10021449970669 17x9x6 .53 cu ft
97068 4” 6 021149970686 10021449970683 17x9x6 .53 cu ft


20 Oct