Sealants

RectorSeal® No. 5®
RectorSeal® No. 5® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2″ and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS pipe or Oxygen. Conforms to Federal Spec. TT-S-1732.

Certified to NSF/ANSI Standard 61, Annex  G

RectorSeal® T Plus 2™
RectorSeal® T Plus 2® pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. T Plus 2 may be pressurized immediately following application. Conforms to TT-S-1732.

FBC System Compatible* indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® pipe and fittings.
FlowGuard Gold®, BlazeMaster® and Corzan® are licensed trademarks of the Lubrizol Corporation.

Certified to NSF/ANSI Standard 61, Annex  G

RectorSeal® Tru-Blu™
RectorSeal® Tru-Blu™ pipe thread sealant with PTFE is a fast-dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, and CPVC pipe. Great for use as a positive lock and seal on threaded fasteners. Conforms to Federal Spec. TT-S-1732. Certified to NSF/ANSI Standard 61, Annex  G

RectorSeal® No. 5® Special
RectorSeal® No. 5® Special pipe thread sealant is a variation of the basic RectorSeal® No. 5 formulation. For use where a low odor sealant with low temperature application is required. It is a non-staining, soft set compound specifically formulated for use on gas piping or when gas detection equipment is used. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Conforms to TT-S-1732.

RectorSeal® No. 5® Sub-Zero
RectorSeal® No. 5® Sub-Zero pipe thread sealant is a low odor, non-staining, soft set thread sealant for use where low temperature application is a requirement. It is brushable to -35 degrees F. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Conforms to TT-S-1732.

RectorSeal® No. 100 Virgin™
RectorSeal® No. 100 Virgin™ pipe thread sealant is a non-setting industrial grade compound containing virgin PTFE for use when a pure PTFE product is required. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Conforms to TT-S-1732.

RectorSeal® No. 7
RectorSeal® No. 7 pipe thread sealant is a medium-dry, soft-set sealant designed for use with lines carrying corrosive chemicals including acids, caustics, alcohol, ethylene glycol, gasoline, and ammonia. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, and stainless steel pipe. Conforms to AMS-S-7916 and TT-S-1732.

RectorSeal® No. 21
RectorSeal® No. 21 pipe thread sealant is a black, soft-set, multi-purpose sealant created for applications where a black sealant is preferred. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, fiberglass reinforced polyethylene and PVC pipe. Conforms to AMS-S-7916 and TT-S-1732.