Condensate Management

Mighty Pump

Using the Mighty Pump is the easy way to clear blocked A/C condensate drain lines without nitrogen, gas cartridges or electricity. Quickly clears slime, mold and dirt plugs out of primary and secondary drain lines.

Safe-T-Switch

SS1

Inline, low voltage condensate overflow shutoff switch. Installs vertically or horizontally in primary drain or can be plugged on auxilliary pans. Pre-wired with 4-foot, 18 AWG wires

SS2

Smaller, L-Shaped switch installs on auxiliary pan outlets and requires no plug. Installs easily in tight spaces and catches clogs in primary pan outlet nipples. Pre-wired with 4-foot 18 AWG wires.

SS3

For installation on safety drain pans. Features a special metal clip, designed for quick secure installation on pan rims.

SS2AP

Similar to SS2 model, but with plenum-rated plastic and plenum-rated wire. Smaller, L-Shaped switch installs on auxiliary pan outlets and requires no plug. Installs easily in tight spaces and catches clogs in primary pan outlet nipples.

SS103E

The Electronic Condensate Overflow Switch contains low power consuming, state-of-the-art microelectronics. SS103E can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾” adapter, bushing and cap. An additional sensor can be installed in the auxiliary drain pan. SS103E provides the

added  protection

of dual sensor control with the simplicity of installing a single 2-wire device. No moving parts, simply connect to the yellow wire.

SS500EP

SS500EP is easily installed directly in the drain pan when plenum rating is needed. Its small size and slim profile

makes

it great for use on commercial rooftop downflow units.

SS700E

Safe-T-Switch® model SS700E Electronic Condensate Overflow Switch is installed in the auxiliary drain pan. The low power consuming state-of-the-art microelectronics detects clogged air conditioning condensate and drains and shuts off the system. The SS700E’s logic circuit continuously samples the probes for water

SS610E

SS610E is specially designed for use in Mini Split systems. Its small Sensor can easily fit in the confined internal spaces of most units. It can also be installed directly in the Drain Pan or clipped to the unit’s Coils. SS610E’s CPU unit is housed in an attractive casing that can be mounted directly to the side of the unit. Uses power from A/C unit so no batteries are required.

AquaGuard Condensate Management Systems

Drain Pans

ClearTrap Kits

  • Clear cleanable trap.

 SmartTrap Kits

  • Float switch overflow protection.
  • Clear cleanable trap. Switches available sseparately

Waterless Trap Kits

  • Waterless freeze protection

 Overflow Switches

  • Float switch overflow protection.

Wiring: