Safe T Switch detects clogged A/C condensate drains and shuts off the system to prevent water damage to floors, walls and ceilings. Can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾” adapter, bushing and cap. Can be installed on a sloping line and does not need to be level or plumb.
video by: HVAC Learning Solutions
28 Nov
Twitter ► https://twitter.com/rectorseal
Facebook ► https://www.facebook.com/rectorseal
Click Here To Subscribe! ► http://bit.ly/RectorSeal
More info: https://www.rectorseal.com/index.php/desolv-cleaning-kit/
Use to deep clean the indoor evaporator of mini-split A/C units that are located in areas where wall and floor protection are necessary.
Kit Contents
• Desolv Cleaning Solution (1 gal.)
• C-Band Frame Assembly
• Replacement Bags (2)
• Wedge Sheets (2)
• Drain Pail (5 gal)
• Installation Instructions
07 Jan
NOVENT® locking caps seal standard Schraeder service valves on all central AC units and minisplits to help prevent refrigerant leakage. Novent provides dual protection with a single screw-on installation. Safe guard your AC system’s efficiency and the environment from lost or accidental mixing of refrigerant gases.
23 Oct
RectorSeal® Track-Safe™ is a galvanized steel L shaped angle with an intumescent strip that permanently attaches to one side of a deep leg header track.
For more information please visit RectorSeal® Track-Safe™
23 Sep
Single-Use Wire Grabber Pulling Tool Flyer
Simple- Easy-Reliable-Durable low cost single use device for pulling wire.
New beveled edge for easier pulls around corners.
Use once and then recycle along with scrap wire. The RectorSeal® Single-Use Wire Grabber™ is available in 18 sizes (8 AWG through 1000 mcm) to be used in sets to accommodate jobs of different sizes. Works on 600 volts through 35 KV wire and rated for both copper and aluminum wire. The lanyards are available in a variety of lengths to make staggering multiple wire pulls effortless especially through and around nineties. The small pulling head reduces friction; therefore there is no need to oversize conduit to accommodate the pulling head.
| Product Description | Product Code | Qty/Cs. | Lbs. |
|---|---|---|---|
| SU 8 AWG Wire Grabber w/11″ lanyard | 98120 | 6 | 1 |
| SU 8 AWG Wire Grabber w/15″ lanyard | 98117 | 6 | 1 |
| SU 8 AWG Wire Grabber w/19″ lanyard | 98118 | 6 | 1 |
| SU 8 AWG Wire Grabber w/23″ lanyard | 98119 | 6 | 1 |
| SU 6 AWG Wire Grabber w/11″ lanyard | 98137 | 6 | 1 |
| SU 6 AWG Wire Grabber w/15″ lanyard | 98138 | 6 | 1 |
| SU 6 AWG Wire Grabber w/19″ lanyard | 98139 | 6 | 1 |
| SU 6 AWG Wire Grabber w/23″ lanyard | 98140 | 6 | |
| SU 4 AWG Wire Grabber w/11″ lanyard | 98133 | 6 | 1 |
| SU 4 AWG Wire Grabber w/15″ lanyard | 98134 | 6 | 1 |
| SU 4 AWG Wire Grabber w/19″ lanyard | 98135 | 6 | 1 |
| SU 4 AWG Wire Grabber w/23″ lanyard | 98136 | 6 | 1 |
| SU 3 AWG Wire Grabber w/11″ lanyard | 98129 | 6 | 1 |
| SU 3 AWG Wire Grabber w/15″ lanyard | 98130 | 6 | 1 |
| SU 3 AWG Wire Grabber w/19″ lanyard | 98131 | 6 | 1 |
| SU 3 AWG Wire Grabber w/23″ lanyard | 98132 | 6 | 1 |
| SU 2 AWG Wire Grabber w/11″ lanyard | 98125 | 6 | 1 |
| SU 2 AWG Wire Grabber w/15″ lanyard | 98126 | 6 | 1 |
| SU 2 AWG Wire Grabber w/19″ lanyard | 98127 | 6 | 1 |
| SU 2 AWG Wire Grabber w/23″ lanyard | 98128 | 6 | 1 |
| SU 1 AWG Wire Grabber w/11″ lanyard | 98121 | 6 | 1 |
| SU 1 AWG Wire Grabber w/15″ lanyard | 98122 | 6 | 1 |
| SU 1 AWG Wire Grabber w/19″ lanyard | 98123 | 6 | 1 |
| SU 1 AWG Wire Grabber w/23″ lanyard | 98124 | 6 | 1 |
| SU 1/0 AWG Wire Grabber w/14″ lanyard | 98141 | 6 | 1 |
| SU 1/0 AWG Wire Grabber w/21″ lanyard | 98142 | 6 | 1 |
| SU 1/0 AWG Wire Grabber w/28″ lanyard | 98143 | 6 | 1 |
| SU 1/0 AWG Wire Grabber w/35″ lanyard | 98144 | 6 | 1 |
| SU 2/0 AWG Wire Grabber w/14″ lanyard | 98145 | 6 | 2 |
| SU 2/0 AWG Wire Grabber w/21″ lanyard | 98146 | 6 | 2 |
| SU 2/0 AWG Wire Grabber w/28″ lanyard | 98147 | 6 | 2 |
| SU 2/0 AWG Wire Grabber w/35″ lanyard | 98148 | 6 | 2 |
| SU 3/0 AWG Wire Grabber w/14″ lanyard | 98149 | 6 | 2 |
| SU 3/0 AWG Wire Grabber w/21″ lanyard | 98150 | 6 | 2 |
| SU 3/0 AWG Wire Grabber w/28″ lanyard | 98151 | 6 | 2 |
| SU 3/0 AWG Wire Grabber w/35″ lanyard | 98152 | 6 | 2 |
| SU 4/0 AWG Wire Grabber w/14″ lanyard | 98153 | 6 | 2 |
| SU 4/0 AWG Wire Grabber w/21″ lanyard | 98154 | 6 | 2 |
| SU 4/0 AWG Wire Grabber w/28″ lanyard | 98155 | 6 | 2 |
| SU 4/0 AWG Wire Grabber w/35″ lanyard | 98156 | 6 | 3 |
| SU 250 MCM Wire Grabber w/14″ lanyard | 98157 | 6 | 3 |
| SU 250 MCM Wire Grabber w/21″ lanyard | 98158 | 6 | 3 |
| SU 250 MCM Wire Grabber w/28″ lanyard | 98159 | 6 | 3 |
| SU 250 MCM Wire Grabber w/35″ lanyard | 98160 | 6 | 4 |
| SU 300 MCM Wire Grabber w/14″ lanyard | 98161 | 6 | 3 |
| SU 300 MCM Wire Grabber w/21″ lanyard | 98162 | 6 | 3 |
| SU 300 MCM Wire Grabber w/28″ lanyard | 98163 | 6 | 4 |
| SU 300 MCM Wire Grabber w/35″ lanyard | 98164 | 6 | 4 |
| SU 350 MCM Wire Grabber w/14″ lanyard | 98165 | 6 | 4 |
| SU 350 MCM Wire Grabber w/21″ lanyard | 98166 | 6 | 4 |
| SU 350 MCM Wire Grabber w/28″ lanyard | 98167 | 6 | 4 |
| SU 350 MCM Wire Grabber w/35″ lanyard | 98168 | 6 | 5 |
| SU 400 MCM Wire Grabber w/14″ lanyard | 98169 | 6 | 4 |
| SU 400 MCM Wire Grabber w/21″ lanyard | 98170 | 6 | 4 |
| SU 400 MCM Wire Grabber w/28″ lanyard | 98171 | 6 | 4 |
| SU 400 MCM Wire Grabber w/35″ lanyard | 98172 | 6 | 5 |
| SU 500 MCM Wire Grabber w/14″ lanyard | 98173 | 6 | 5 |
| SU 500 MCM Wire Grabber w/21″ lanyard | 98174 | 6 | 4 |
| SU 500 MCM Wire Grabber w/28″ lanyard | 98175 | 6 | 6 |
| SU 500 MCM Wire Grabber w/35″ lanyard | 98176 | 6 | 6 |
| SU 600 MCM Wire Grabber w/14″ lanyard | 98177 | 6 | 6 |
| SU 600 MCM Wire Grabber w/21″ lanyard | 98178 | 6 | 6 |
| SU 600 MCM Wire Grabber w/28″ lanyard | 98179 | 6 | 6 |
| SU 600 MCM Wire Grabber w/35″ lanyard | 98180 | 6 | 7 |
| SU 750 MCM Wire Grabber w/14″ lanyard | 98181 | 6 | 7 |
| SU 750 MCM Wire Grabber w/21″ lanyard | 98182 | 6 | 7 |
| SU 750 MCM Wire Grabber w/28″ lanyard | 98183 | 6 | 7 |
| SU 750 MCM Wire Grabber w/35″ lanyard | 98184 | 6 | 8 |
| SU 1000 MCM Wire Grabber w/14″ lanyard | 98185 | 6 | 8 |
| SU 1000 MCM Wire Grabber w/21″ lanyard | 98186 | 6 | 8 |
| SU 1000 MCM Wire Grabber w/28″ lanyard | 98187 | 6 | 8 |
| SU 1000 MCM Wire Grabber w/35″ lanyard | 98188 | 6 | 8 |
RectorSeal®
2601 Spenwick Drive
Houston TX 77055
Tel : 713-263-8001 / 800-231-3345
Fax : 713-263-7577 / 800-441-0051
24 Jan
