Universal Mounting Brackets for Mini-Split Condensers

H = 18″
W = 331/2″
D = 22″ WBB500 = 24
RS # (ref. #) DESCRIPTION WT LBS.
87733 (WBB300) WALL BRACKET 11
87734 (WBB300SS) WALL BRACKET 14
87735 (WBB500) WALL BRACKET 14
Sliding cross bar gives this
bracket an exceptional
equipment width range.
Available in stainless steel
Includes level for convenience.
Finish:
WBB300 – Powdercoat
WBB300SS – Stainless
WBB500 – Powdercoat
Min/Max mounting width: 93/4″- 30″
Min/Max mounting depth: 101/2″- 16″
Max load capacity:
WBB300/WBB300SS – 300 lbs
WBB500 – 500 lbs
87741
H = 361/4″
W = 151/2″
D = 32″
87744
H = 361/4″
W = 17″
D = 36″
87744 (cwgl) DUPLEX STAND 24
Securely mounts two
condenser units, one above
the other. Includes anti-slip
rubber feet.
Finish: Powdercoat
Min/Max mounting width:
CBYW3 – 117/8″ – 271/2″
CWGL – 153/4″ – 311/2″
Min/Max mounting depth:
CBYW3 – 61/4″ – 133/8″
CWGL – 77/8″ – 15″
Max weight capacity:
CBYW3 – 76 lbs x 2
CWGL – 176 lbs x 2
87743
H = 4-121/4″
W = 313/4″
D = 15″
87746
H = 121/2″
W = 483/4″
D = 21″
87743 (CNG) SLAB STAND 11
Raises condenser up above a flat surface. Each leg is independently adjustable for uneven surfaces. Anti-slip rubber feet.
Finish: 87743 – Powdercoat
87746 – Galvanized
Min/Max mounting width:
87743 – 113/4″ – 271/2″
87746 – 283/4″ – 381/2″
Min/Max mounting depth:
87743 – 61/4″ – 131/4″
87746 – 231/4 – 301/4
Max weight capacity:
87743 – 176 lbs
87746 – 440 lbs
H = 311/4″
W = 391/2″
D = 201/4″
87732 (PCK30) HEAVY DUTY WALL BRACKET 30
This bracket includes extra integral cross bracing for
the ultimate in stability.
Finish: Galvanized
Min/Max mounting width: 153/4″ – 351/4″
Min/Max mounting depth: 93/4″ – 15″
Max load capacity: 330 lbs
H = 22″
W = 391/2″
D = 22″
87745 (WRB250) SLOPE STAND 13
Adjustable bracket follows
roof slope up to 45 degrees or 12 inch pitch providing a level mounting surface.
Includes level.
Finish: Powdercoat
Min/Max mounting width: 6″ – 35″
Min/Max mounting depth: 10″ – 19″
Max weight capacity: 250 lbs
H = 111/4″
W = 291/2″
D = 163/4″
87731 (CBZG) UNDER WINDOW BRACKET 9
A top cross bar allows
this bracket to be installed
under a window or other
obstacle. Ideal for window
type air conditioner support.
Finish: Galvanized
Min/Max mounting width: 113/4″ – 271/2″
Min/Max mounting depth: 61/4″ – 13″
Max load capacity: 176 lbs
H = 281/2″
W = 311/2″
D = 20
87742 (CDF) UNDER SLAB HANGER BRACKET 12
Permits condenser to
be supported under a slab,
overhang or structural member.
Finish: Powdercoat
Min/Max mounting width: 12″ – 28″
Min/Max mounting depth: 6″ – 13″
Max weight capacity: 132 lbs

Risers

RS # (ref. #) DESCRIPTION WT LBS.
87772 (RMB10L) FIX-IT-FOOT Low 10″ 2.5
87774 (RMB16L) FIX-IT-FOOT Low 16″ 8.2
Low Profile Rubber Risers offer significant vibration isolation, and are ideal for rooftop support of equipment and systems. Aluminum linear track permits the use of standard strut hardware (not included). Underside has recessed area to permit easy leveling.
Materials: Recycled Crumb Rubber/Aluminum

Max weight capacity:
87772 (RMB10L) – 180 lbs
87774 (RMB16L) – 280 lbs

87771 (RMB10) FIX-IT-FOOT 10″ 5.2
87773 (RMB16) FIX-IT-FOOT 16″ 7.5
87775 (RMB24) FIX-IT-FOOT 24″ 16.5
87776 (RMB40) FIX-IT-FOOT 40” 20.5
Similar to the low profile model, these risers have additional vibration isolation due to their increased height. Their extra weight will increase stability. Aluminum channel accepts standard Unistrut hardware.

Max weight capacity:
87771 (RMB10) – 180 lbs
87773 (RMB16) – 280 lbs
87775 (RMB24) – 492 lbs
87776 (RMB40) –

Light Duty Risers
87761 (PR-351N-I) POLYMER RISER 14″ (20) 29
87762 (PR-351N-M) POLYMER RISER 19″x19″x16″ (20) 41
87763 (PR-351N-L) POLYMER RISER 39″ (4) 16
87765 (PRC-351N) END CAPS (1 pair) 1
Polymer Risers are light, durable and weather resistant.
Linear track holds 3/8″ hex head bolts – two 7/8″ long bolts included. End caps available.

Material: Ivory PVC

Max weight capacity:
PR-351N-I – 308 lbs
PR-351N-M – 397 lbs
PR-351N-L – 880 lbs