Limited Warranties and Limitation of Liability

Contact Customer Support

E-Mail Customer Support

Installation / Wiring Diagrams

Only AquaGuard Condensate Management Systems offer the added protection of a dual system shutdown (power and compressor) along with the ability to activate an alarm simultaneously. Competitors’ products only turn off the HVAC system (compressor only) or activate an optional alarm – they cannot do both simultaneously. When only the compressor is turned off, the HVAC system will continue to operate, leaving the homeowner unaware of a malfunctioning HVAC unit and at risk for potential water damage issues or other hazards.

By providing these additional benefits and peace of mind to homeowners, the AquaGuard AG-1250E, AG-2550E, AG-3000E Series (AG-3150E, AG-3175E, AG-3180E and AG-3575E), and AG-4000E Series, all feature an exclusive control wire that contains four (4) wires – red, black, purple, and white.

b254de6db0717cb71d0257f7fe13ef76

For easy installation, the AquaGuard Control Wire is included with the following wiring label:

RED: Input. 24VAC. Connect to HVAC Transformer (HOT).
BLACK: Input. 24VAC. Connect to HVAC Transformer (Common).
PURPLE: Output. “Normally Closed”. Must conect to 24VAC (Thermostat or Compressor) wire.
WHITE: Output. “Normally Open”. Connect to AquaGuard AG-9100 External Audible & Visual Remote Alarm.

To download high-quality PDFs of the AquaGuard Installation/Wiring Diagrams for your desktop or mobile device, please click on the links below:

Wiring Diagram for Breaking RED “Wall Thermostat” Power Wire (Recommended)

Wiring Diagram for Breaking YELLOW Compressor Wire (Optional)

IMPORTANT NOTE: Following the recommended installation wiring diagram (RED) will provide all the features and benefits of AquaGuard Condensate Management Systems including the added protections of a simultaneous dual system shutdown and optional alarm activation. When using the optional diagram (YELLOW), only the HVAC compressor will turn off during condensate detection. The air handler will continue to operate even if the optional alarm has been activated.

Limited Warranties and Limitation of Liability

1 YEAR SWITCH AND SENSOR LIMITED WARRANTY AND LIMITATION OF LIABILITY

The limitations of liability set forth below include body and all component parts as well as the product itself as a whole.

RectorSeal warrants to the original consumer purchaser (“Purchaser”) of its AquaGuard switch and sensor products, that they are free from defects in material or workmanship for a period of one (1) year from the date of purchase. If this product shall prove to be defective within the one (1) year period from the date of purchase, it shall be repaired or replaced, at RectorSeal’s® option, subject to the GENERAL TERMS and CONDITIONS set forth below.

EXCLUSIONS
This warranty does not cover damages resulting from use of components or accessories not approved by RectorSeal®.

3, 5 and 10 YEAR SECONDARY DRAIN PAN LIMITED WARRANTY AND LIMITATION OF LIABILITY

This warranty applies only to secondary drain pans installed in the United States and Canada.

RectorSeal® warrants to the original consumer purchaser (“Purchaser”) of its AquaGuard secondary drain pan products, that they are free from defects in material or workmanship for a period of three (3) years for Titan pan models, five (5) years for Goliath Value Series and Spartan pan models or ten (10) years for Goliath and Goliath Furnace models, from the date of purchase. If this product shall prove to be defective within the three, five or ten (3, 5 or 10) year period from the date of purchase, it shall be repaired or replaced, at RectorSeal’s® option, subject to the GENERAL TERMS and CONDITIONS set forth below. This warranty extends only to the original consumer purchaser and is non-transferable.

EXCLUSIONS

This warranty does not cover damages resulting from the use of corrosive material (including, but not limited to: Acetone, MEK and petroleum-based products); nor damages resulting from use of components or accessories not approved by RectorSeal®.

3-5-10_Warranty

GENERAL TERMS AND CONDITIONS

To be eligible for the warranty the purchaser must provide RectorSeal® with the following:

  1. Proof of Purchase (Original Receipt)
  2. Installer’s Testimony
  3. Original Product
  4. Original Work Order
  5. Photos of Installation

PURCHASER MUST PAY ALL LABOR AND SHIPPING CHARGES NECESSARY TO REPLACE PRODUCT COVERED BY THIS WARRANTY. This warranty shall not apply to acts of God, nor shall it apply to products which, in the sole judgment of RectorSeal® have been subject to negligence, abuse, accident, tampering, misapplication, alteration; nor due to improper installation, operation or maintenance or storage; nor moved from its original place of installation; nor to other than normal application, use or service, including but not limited to, operational failures caused by corrosion, rust or other foreign materials in the system. Requests for service under this warranty shall be made by returning the defective product to the Retail outlet or to RectorSeal® as soon as possible after the discovery of any alleged defect. RectorSeal® will subsequently take corrective action as promptly as reasonably possible. No requests for service under this warranty will be accepted if received more than thirty-one (31) days after the term of the warranty. This warranty sets forth RectorSeal®’s sole obligation and purchaser’s exclusive remedy for defective products. For your benefit and protection register your product within thirty (30) days of installation. This will initiate the Warranty period and will allow us to contact you, should it become necessary. In the absence of a recorded product registration, the Warranty period will begin upon product shipment from RectorSeal®. In the event that RectorSeal® attempts to contact consumers regarding a recall or other matter, and any damages occur, which could have been avoided by registration by the consumer, RectorSeal® shall have no liability. IN ALL CIRCUMSTANCES, RectorSeal®’S MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT ALONE. Warranty claims must be registered with RectorSeal® within thirty (30) days of damage or malfunction. RectorSeal® reserves the right to visit the site of the installation or to require documentation of the claim before assuming any responsibility under the provisions of this Warranty. Consumer agrees to inspect the product at the time of installation for any reasonable discernible defects and, further, agrees to inspect the product annually. Any damages occurring, which could have been avoided by proper inspection will not be the responsibility of RectorSeal®. RectorSeal® SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER TO THE PURCHASER OR ANY THIRD PARTY. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL EXPRESSED WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE APPLICABLE EXPRESSED WARRANTIES PROVIDED HEREIN. Some states do not allow the exclusion of limitation of incidental and consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.

VENUE: Any purchaser or third party actions brought for any reason hereunder shall be commenced in Houston, TX and no other jurisdiction, and such action shall be governed by and construed in accordance with the laws of the State of Texas. Any notice herein shall be sent by certified or registered mail to: RectorSeal., ATTN: Warranty Department, 2601 Spenwick Dr Houston, TX 77055