|
|
RECTORSEEK™ MID-TEMP AND
|
Description | Characteristics | Applications | Packaging | Instructions | Precautions | Specifications |
Limited Warranty
RectorSeek™ Mid-Temp is a leak locator for use at normal temperatures (between 40 degree F and 200 degree F) on pipe or tank systems that contain gases. It can be used on oxygen systems.
RectorSeek™) Low-Temp is designed to detect leaks in colder temperature ranges (from -35 degree F to +200 degree F) on pipe and tank systems that contain gases. DO NOT use on oxygen systems.
|
|
RectorSeek™ Mid-Temp and RectorSeek™ Low-Temp are formulated for use on all types of pipe, tubing, valves, cylinders, tanks, pressure vessels, condenser/evaporator coils, refrigeration coils, and many other similar applications*. They can be used with freons and ammonia.
DO NOT use RectorSeek™ Low-Temp for oxygen leaks.
*Consult manufacturers for compatibility issues.
| Mid-Temp Code | Low-Temp Code |
Size | Qty. Per Case | Lbs. per Case | Cu. Ft Per Case |
60633 |
61633 |
4 oz. dispenser spout (118 ml) | 12 bottles |
4 |
0.15 |
60554 |
61554 |
8 oz. dauber top (237 ml) | 12 bottles |
8 |
0.25 |
60434 |
61434 |
16 oz. spray gun (473 ml) | 12 bottles |
15 |
0.67 |
60435 |
61435 |
16 oz. refill (473 ml) | 12 bottles |
15 |
0.67 |
60273 |
61273 |
Gallon (3.8 L) | 4 bottles |
36 |
1.21 |
60151 |
61151 |
6 Gallon (27.7 L) | 1 pail |
57 |
1.52 |
60111 |
61111 |
55 Gallon (208 L) | 1 drum |
496 |
9.01 |
1. Apply leak locator directly on pressurized joint or seam to be tested.
2. Bubbles will appear at location of leaking gas.
3. After testing, wipe off and allow to air dry.
For additional technical information, call Toll Free 1-800-231-3345.
FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300
PRECAUTIONS: Do not take internally. May be harmful if swallowed in large quantities. May cause mild eye or skin irritation. Wear adequate protective gear and clothing. Avoid contact with eyes and skin. Wash after handling. FIRST AID: For any overexposure, get immediate medical attention after first aid is given. Eyes - Flush 15 minutes with clean water. Skin - Wash with soap and water. Ingestion - Only if conscious, give large amounts of water and INDUCE VOMITING. FIRE AND SPILLS: For fire, use water fog, CO2, foam or dry chemicals. Wipe up spills to prevent footing hazard. STORAGE AND HANDLING: Keep container closed when not in use. Do not reuse empty container. KEEP OUT OF REACH OF CHILDREN.
For additional information, refer to Material Safety Data Sheet.
| Mid-Temp | Low-Temp | |
| Wt/Gal @ 77 degree F | 8.35 +- .5 lbs/gal | 8.50 +- .5 lbs/gal |
| Flash Point SETA CC | None | None |
| Color | Blue | Red |
| Shelf Life | 2 years | 2 years |
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
RectorSeal® makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL®. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed, and RectorSeal® shall not be liable for incidental or consequential damages.
MANUFACTURED IN U.S.A. BY
RectorSeal®
2601 Spenwick Drive • Houston, TX 77055 USA
713-263-8001 • Fax 713-263-7577
Toll-free 800-231-3345 • Fax 800-441-0051