|
|
CTT™ - SM
|
Description | Characteristics | Applications | Packaging | Instructions | Precautions | Specifications |
Limited Warranty
CTT™ - SM is an easy-to-use self-metering cooling tower treatment. In addition to controlling scale, mud, silt and foaming, CTT™ - SM provides corrosion protection for ferrous and non-ferrous metals. The product works without the need for special or complicated feeder equipment. One tube treats up to 10 tons for 3 months. CTT™ - SM contains special tracing dyes to monitor the product.
|
|
CTT™ - SM is self metering. Place one tube for every 10 tons of tower capacity in the tower sump.
| Code | Size | Qty. Per Case | Lbs. per Case | Cu. Ft Per Case |
68032 |
16 tablet tube | 2 |
5 |
0.25 |
1. In very dirty systems, acid clean first for best results.
2. Use one tube for each 10 tons of tower capacity, up to 100 tons. DO NOT OPEN THE TUBE.
3. Place tubes into the tower sump. The tubes may be loosely tied, if necessary, to facilitate removal.
Water will turn a bright greenish-yellow.
4. After one month start checking tubes for tablet content each week. If empty, replace. If near empty,
leave in and add tubes as needed.
5. Use Biotabs™ to control algae growth.
For additional technical information, call Toll Free 1-800-231-3345.
FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300
CONTAINS: Sodium Silicate. PRECAUTIONS: May cause eye and skin irritation. Wear adequate protective gear and clothing. Avoid contact with eyes and skin. Wash after handling. FIRST AID: For any overexposure, get immediate medical attention after first aid is given. Eyes - Flush 15 minutes with clean water. Skin - Wash with soap and water. Ingestion - Only if conscious, give large amounts of water. Seek immediate medical attention. KEEP OUT OF REACH OF CHILDREN.
For additional information, refer to Material Safety Data Sheet.
| Flash Point SETA CC | None |
| Color | Orange tablet |
| Shelf Life | 2 years |
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
RectorSeal® makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL®. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed, and RectorSeal® shall not be liable for incidental or consequential damages.
MANUFACTURED IN U.S.A. BY
RectorSeal®
2601 Spenwick Drive Houston, TX 77055 USA
713-263-8001 Fax 713-263-7577
Toll-free 800-231-3345 Fax 800-441-0051