MATERIAL SAFETY DATA SHEET
MSDS 0633
=============================================================================
Section 1 -- PRODUCT AND COMPANY IDENTIFICATION
-----------------------------------------------------------------------------
HMIS CODES
PRODUCT NAME Health 2
Clean-N-Safe Coil Cleaner Flammability 2
Reactivity 0
PRODUCT CODES PPI B
83782, 83784, 83785
USE
Coil Cleaner
MANUFACTURER'S NAME EMERGENCY TELEPHONE NO.
The RectorSeal Corporation Chemtrec 24 Hours
2601 Spenwick Drive (800) 424-9300
Houston, Texas 77055 USA (703) 527-3887 International
DATE OF PREPARATION TECHNICAL SERVICE TELEPHONE NO.
October 5, 2005 (800) 231-3345
=============================================================================
Section 2 -- COMPOSITION/INFORMATION ON INGREDIENTS
-----------------------------------------------------------------------------
CHEMICAL FAMILY: Organic/Inorganic
INGREDIENT: Octylphenoxypolyethoxyethanol
PERCENTAGE BY WEIGHT: --
CAS NUMBER: 9036-19-5
EINECS: N/D
ANNEX I INDEX#: N/D
SUBSTACE NAME IN ANNEX I: N/D
LABELING SYMBOLS: N/D
RISK R-PHRASES: N/D
SAFETY S-PHRASES: N/D
INGREDIENT: Polylene Glycol Butyl Ether
PERCENTAGE BY WEIGHT: --
CAS NUMBER: 57018-52-7
EINECS: N/D
ANNEX I INDEX#: 603-129-00-6
SUBSTACE NAME IN ANNEX I: + 1-.it.tert.it.-butoxypropan-2-ol
LABELING SYMBOLS: Xi
RISK R-PHRASES: R10, R41
SAFETY S-PHRASES: S2, S26, S39
INGREDIENT: Sodium Metasilicate
PERCENTAGE BY WEIGHT: --
CAS NUMBER: 6834-92-0
EINECS: 229-912-9
ANNEX I INDEX#: 014-010-00-8
SUBSTACE NAME IN ANNEX I: disodium metasilicate
LABELING SYMBOLS: C
RISK R-PHRASES: R34, R37
SAFETY S-PHRASES: S1/2, S13, S24/25, S36/37/39, S45
=============================================================================
Section 3 -- HAZARDS IDENTIFICATION
-----------------------------------------------------------------------------
SUMMARY OF ACUTE HAZARDS
Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and
other CNS effects at high concentrations. Skin irritation, dermatitis, and
defatting.
ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS
INHALATION
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea,
CNS depression, and unconsciousness.
EYE CONTACT
Watering, blurred vision, inflammation, and irritation which can result in
corneal injury.
SKIN CONTACT
Irritation, dermatitis.
INGESTION
Nausea, vomiting; CNS depression; irritation of gastrointestinal tract,
liver and peritoneal wall; lung congestion.
SUMMARY OF CHRONIC HAZARDS
Skin irritation, contact dermatitis, and defatting.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
Individuals with pre-existing or chronic diseases of the eyes, skin,
respiratory system, cardiovascular system, gastrointestinal system, liver,
or kidneys may have increased susceptibility to excessive exposure.
=============================================================================
Section 4 -- FIRST AID MEASURES
-----------------------------------------------------------------------------
If INHALED: If overcome by exposure, remove victim to fresh air
immediately. Give oxygen or artificial respiration as
needed. Obtain emergency medical attention. Prompt
action is essential.
If on SKIN: Immediately wash with soap and water. Remove and wash
any contaminated clothing.
If in EYES: Flush eyes with large amounts of water for 15 minutes.
Get medical attention if irritation persists.
If SWALLOWED: If swallowed, call a physician immediately. Only induce
vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person.
=============================================================================
Section 5 -- FIRE FIGHTING MEASURES
-----------------------------------------------------------------------------
FLASH POINT LEL UEL
145 F(63 C) SETA CC, Negative Flame Extension N/D N/D
EXTINGUSING MEDIA
Foam, dry chemical, CO2, or water fog.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained full face piece
breathing apparatus and full body protective clothing. Hazardous
decomposition products possible (see Section 10). Evacuate area. Dike area
as run-off may create additional environmental contamination.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Foam or water can cause frothing. Heat
may build up pressure and rupture containers.
=============================================================================
Section 6 -- ACCIDENTAL RELEASE MEASURES
-----------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources
of ignition. Use absorbent materials to prevent footing hazard and to contain.
Ventilate area with natural or explosion-proof, forced air ventilation. Avoid
flushing into sewers, drains, waterways, and soil. Wear protective clothing
and respiratory protection during cleanup.
=============================================================================
Section 7 -- HANDLING AND STORAGE
-----------------------------------------------------------------------------
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Shake well before using.
Keep away from heat, sparks and open flames.
OTHER PRECAUTIONS: Avoid prolonged or repeated contact with skin or clothing.
Empty containers may contain residues; treat as if full and observe all
products precautions. Do not reuse empty containers.
=============================================================================
Section 8 -- EXPOSURE CONTROLS/PERSONAL PROTECTION
-----------------------------------------------------------------------------
INGREDIENT UNITS
Octylphenoxypolyethoxyethanol
ACGIH TLV N/D ppm
OSHA PEL N/D ppm
Polylene Glycol Butyl Ether
ACGIH TLV N/D ppm
OSHA PEL N/D ppm
Sodium Metasilicate
ACGIH TLV N/D ppm
OSHA PEL N/D ppm
RESPIRATORY PROTECTION (SPECIFY TYPE): In confined, poorly ventilated areas,
use NIOSH/MSHA approved air purifying or supplied air respirators during
soldering operations until fumes have dissipated.
VENTILATION - LOCAL EXHAUST: Acceptable
SPECIAL: Explosion proof
MECHANICAL (GENERAL): Acceptable
OTHER: N/A
PROTECTIVE GLOVES: Wear rubber gloves.
EYE PROTECTION: Safety glasses (ANSI Z-87.1 or equivalent)
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Chemical resistant coveralls
recommended.
WORK/HYGIENIC PRACTICES: Where use can result in skin contact, wash exposed
areas thoroughly before eating, drinking, smoking, or leaving work area.
Launder contaminated clothing before reuse.
=============================================================================
Section 9 -- PHYSICAL AND CHEMICAL PROPERTIES
-----------------------------------------------------------------------------
BOILING POINT: >212 F (100 C) @ 760mm Hg
SPECIFIC GRAVITY (H20 = 1): 1.04
VAPOR PRESSURE (mm Hg): N/D
MELTING POINT: N/A
VAPOR DENSITY (AIR = 1): <1
EVAPORATION RATE (ETHYL ACETATE = 1): >1
APPEARANCE/ODOR: Clear Liquid / Mild Odor
SOLUBILITY IN WATER: Soluble
VOLATILE ORGANIC COMPOUND: >5% (50 g/L)
=============================================================================
Section 10 -- STABILITY AND REACTIVITY
-----------------------------------------------------------------------------
STABILITY: Stable
CONDITIONS TO AVOID: None
INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizers, acids and bases.
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO, and fragmented hydrocarbons.
HAZARDOUS POLYMERIZATION: Will not occur.
=============================================================================
Section 11 -- TOXICOLOGY INFORMATION
-----------------------------------------------------------------------------
CHRONIC HEALTH HAZARDS
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen.
-----------------------------------------------------------------------------
TOXICOLOGY DATA
Ingredient Name
-----------------------------------------------------------------------------
Octylphenoxypolyethoxyethanol
Oral-Rat LD50:4190 mg/kg
Inhalation-Rat LC50:N/D
Polylene Glycol Butyl Ether
Oral-Rat LD50:N/D
Inhalation-Rat LC50:N/D
Sodium Metasilicate
Oral-Rat LD50:1153 mg/kg
Inhalation-Rat LC50:N/D
=============================================================================
Section 12 -- Ecological Information
-----------------------------------------------------------------------------
ECOLOGICAL DATA
Ingredient Name
-----------------------------------------------------------------------------
Octylphenoxypolyethoxyethanol
Food Chain Concentration Potential N/D
WATERFOWL TOXICITY N/D
BOD N/D
AQUATIC TOXICITY N/D
Polylene Glycol Butyl Ether
Food Chain Concentration Potential N/D
WATERFOWL TOXICITY N/D
BOD N/D
AQUATIC TOXICITY N/D
Sodium Metasilicate
Food Chain Concentration Potential N/D
WATERFOWL TOXICITY N/D
BOD N/D
AQUATIC TOXICITY N/D
=============================================================================
Section 13 -- DISPOSAL CONSIDERATIONS
-----------------------------------------------------------------------------
Waste Classification: Non-regulated liquid waste
Disposal Method: Dispose of all liquid waste in accordance with all local,
state and federal regulations.
=============================================================================
Section 14 -- TRANSPORTATION INFORMATION
-----------------------------------------------------------------------------
DOT: Non-Regulated
OCEAN (IMDG): Non-Regulated
AIR (IATA): Non-Regulated
WHMIS (CANADA): N/A
=============================================================================
Section 15 -- REGULATORY INFORMATION
-----------------------------------------------------------------------------
REGULATORY DATA
Ingredient Name
-----------------------------------------------------------------------------
Octylphenoxypolyethoxyethanol
SARA 313 No
TSCA Inventory Yes
CERCLA RQ N/A
RCRA Code N/A
Polylene Glycol Butyl Ether
SARA 313 No
TSCA Inventory Yes
CERCLA RQ N/A
RCRA Code N/A
Sodium Metasilicate
SARA 313 No
TSCA Inventory Yes
CERCLA RQ N/A
RCRA Code N/A
=============================================================================
Section 16 -- OTHER INFORMATION
-----------------------------------------------------------------------------
LABELING SYMBOLS:
Xi : Irritant
C : Corrosive
RISK R-PHRASES:
R10 : Flammable
R34 : Causes burns.
R37 : Irritating to respiratory system.
R41 : Risk of serious damage to eyes.
SAFETY S-PHRASES:
S1/2 : Keep locked up and out of the reach of children.
S2 : Keep out of the reach of children.
S13 : Keep away from food, drink and animal feeding stuffs.
S24/25 : Avoid contact with skin and eyes.
S26 : In case of contact with.
eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.
S39 : In case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
S45 : In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
This document is prepared pursuant to 91/155/EEC ISO 11014-1. The information
herein is given in good faith, but no warranty, expressed or implied is made.
Consult RectorSeal for further information: (713) 263-8001