The Electronic Condensate Overflow Switch contains low power consuming, state-of-the-art microelectronics. SS103E can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾” adapter, bushing and cap. An additional sensor can be installed in the auxiliary drain pan. SS103E provides the added protection of dual sensor control with the simplicity of installing a single 2-wire device. No moving parts, simply connect to the yellow wire.
The logic circuit continuously samples the probes for water. If water is detected, the circuit determines if the condition is transient or permanent. If permanent, the system will be shutdown. Onboard LED’s indicate the condition of the unit at a glance, removing any guess work. Listed to UL 508.
Better Bubble™ leak locator is formulated to pinpoint the smallest leak quickly and easily. Safe to use on most gases including ammonia, oxygen, air, and refrigerants. Its thick formula produces large, long lasting, well defined elastic bubbles that stand up under pressure and windy conditions. It may be used on surface temperatures from 20 degrees F to 250 degrees F, is non-corrosive, and is biodegradable.
FBC System Compatible* indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan pipe and fittings.
FlowGuard Gold®, BlazeMaster® and Corzan® are licensed trademarks of Lubrizol Corporation.
RectorSeek™ Mid-Temp is a leak locator for use at normal temperatures on pipes or tanks that contain gases. It can be used on oxygen, air or gas at temperatures between 40 degrees F to 200 degrees F.
FBC System Compatible* indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan pipe and fittings.