SureSeal®

sure-sealFloor Drain Trap Seal

The SureSeal® Inline Floor Drain Trap Sealer is the green solution for replacing failed trap primers and quickly and easily solving problem associated with drains.

 

IAPMO Certificate of Listing

SEAL LISTING CERTIFICATE OF RENEWAL

ICC-ES Report

sure_seal_diagram2010x1

SureSeal_GroupSureSeal eliminates the need for expensive trap primers yet blocks the emission of noxious sewer gases from backing-up into living or work areas. It is very cost effective, and much simpler to maintain than a tradition water trap primer – providing the ultimate flexibility in design, placement, and maintenance of floor drains in nearly all applications.

Health & Safety

  • SureSeal protects against the spread of dangerous bacteria like Salmonella and deadly infectious diseases like SARS which are believed to be caused/spread by sewer gases
  • Resistant to lime scale and microbiological growth

The SureSeal Inline Trap Sealer solves the problems of infrequently used drains by eliminating the need for a trap primer while preventing the emission of sewer gases from backing-up into living or work areas. It is much less expensive, much more effective, and much simpler to maintain than a trap primer.

Cost Savings

  • Initial cost plus installation is much less expensive than alternative solutions
  • Eliminates the need for complex, time consuming, and expensive repairs when trap primers fail.  (No walls or floors to tear up to access the problem.)

Eco-friendly – Saves Water

  • Reduces use of potable water – lowering water bills
  • Reduces flow of water through sewage treatment systems increasing existing plant capacity

Application

The SureSeal should be utilized where a trap primer has failed or where a trap primer does not exist.

  • New Construction: Used in floor drains to provide added protection against escaping sewer gases. Eliminates the need to repair/replace trap primers when they fail.
  • Retrofit: Used in situations where trap primers have failed or where trap primers were never installed.

The SureSeal floor drain trap sealer can be used with all 2”, 3”, and 4” floor drains and in 3 ½” & 4” floor drain strainers.  Applications include: shower drains, outdoor drains, basement drains, water heater drains, HVAC condensation drains, maintenance areas, floor/mop sinks, residential bathrooms, under kitchen sinks and in laundry rooms.  Stop your floor drain odor and shower drain smell problems with Sure Seal drain trap protection.

SureSeal Installation

  • It eliminates the time and effort of installing trap primers
  • Eliminates the requirement to consider or specify a trap primer
  • None of the headaches or problems associates with traditional trap primers

Product Codes And Case Sizes
Product Code Size Quantity UPC Interleaved Dimensions Cubic Feet
97041 (SS2009V) 2″ Trap Seal 6 021449970419 10021449970416 11.25 x 8.75 x 6 .34
97042 (SS3009V) 3″ Trap Seal 6 021449970426 10021449970423 11.25 x 8.75 x 6 .34
97043 (SS3509V) 3.5″ Trap Seal 6 021449970433 10021449970430 11.25 x 8.75 x 6 .34
97044 (SS4009V) 4″ Trap Seal 6 021449970440 10021449970447 11.25 x 8.75 x 6 .34

Inspection

  • Only requires a simple inspection by viewing with a flashlight.
  • All parts accessible after installation

Job Quoting

  • SureSeal eliminates the time, effort, and expense of researching and specifying complex water based trap primers

Application

  • The SureSeal Inline Trap Sealer can be used with all 2”, 3”, and 4” floor drains and in 3 ½” & 4” floor drain strainers.  I.E shower drains, outdoor drains, basement drains, water heater drains, HVAC condensation drains, maintenance areas, floor/mop sinks, residential bathrooms, under kitchen sinks, apartment and condo bathrooms (providing tenant separation for water as well as fire) and other applications.
  • The SureSeal Inline Trap Sealer can be used for retrofitting, with its variety of designs ensuring compatibility with all other drain types.

Product Information

SureSeal products are simple, easy to use, and install in minutes – not hours.

SureSeal Inline Trap Sealers come in 4 sizes and have been engineered to fit all manufacturers standard floor drains.

Floor Drain Outlet
2″
3″
4″
SureSeal
SS2009V
SS3009V
SS4009V
Floor Drain Strainer
3.5”
4″
SureSeal
SS3509V
SS4009V

No researching and crosschecking manufacturer’s specifications. Just 4 parts solving many problems – nothing could be easier.

Performance

  • SureSeal meets the stringent ASSE 1072 new plumbing code standard for all floors and all floor drain flow rates.
  • Patented engineered design creates no effective restriction on water flow
  • Every SureSeal product meets or exceeds all code requirements
    Drain
    2″
    3″
    4″
    IPC 709.1
    12 GPM
    26 GPM
    56 GPM
    ASSE 1072
    12 GPM
    34 GPM
    73 GPM
  • SureSeal blocks dangerous and noxious sewer gas emissions from backing-up into living or working areas
  • SureSeal’s Space-Age elastomeric EPDM material has been proven in plumbing industry uses for forty years and has been used in non-plumbing critical applications for almost fifty years of continuous use without degradation.
  • Successfully tested with common cleaning solutions and other chemicals approved from drain disposal
  • Functions despite lodging of common debris (mop strings, food residue, etc.)

Installation & Maintenance

  • SureSeal eliminates complex, time consuming, and expensive installations
  • Maintenance-free except for occasional flushing
    • No walls or floors to tear up to access the problem 
  • None of the headaches or problems associated with traditional trap primers
    • No tapping required in the drain to attach a waterline
    • No small diameter, hard-to-support piping required under floor or behind wall
    • No damaged pipe to worry about during pouring of concrete floor
    • No costly 3-stage installation process
    • No call backs when the trap primer fails