The Electronic Condensate Overflow Switch contains low power consuming, state-of-the-art microelectronics. SS103E can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾” adapter, bushing and cap. An additional sensor can be installed in the auxiliary drain pan. SS103E provides the added protection of dual sensor control with the simplicity of installing a single 2-wire device. No moving parts, simply connect to the yellow wire.
The logic circuit continuously samples the probes for water. If water is detected, the circuit determines if the condition is transient or permanent. If permanent, the system will be shutdown. Onboard LED’s indicate the condition of the unit at a glance, removing any guess work. Listed to UL 508.
NOKORODE® Regular Paste Flux will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G
NOKORODE® Aqua Flux™ is one of the very few paste fluxes available that meets ASTM B-813 standards requiring that fluxes be water "washable" and can be flushed from the piping system to prevent corrosion. For use with 95/5, 60/40, 50/50, 40/60 and other solders. Cream color. Not suitable for use with ECO BRASS®. Certified to NSF/ANSI Standard 61, Annex G
NOKORODE® Hot Weather Paste Flux stays firm and stable in hot weather. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
NOKORODE® Cold Weather Paste Flux stays soft and sticky in cold weather. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
NOKORODE® 95/5 Pre-Tinning paste contains 95/5 solder. Great for large diameter fittings or faster soldering of small diameter fittings because it automatically tins before a high temperature is reached. Cuts waste.
