The Electronic Condensate Overflow Switch contains low power consuming, state-of-the-art microelectronics. SS103E can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾” adapter, bushing and cap. An additional sensor can be installed in the auxiliary drain pan. SS103E provides the added protection of dual sensor control with the simplicity of installing a single 2-wire device. No moving parts, simply connect to the yellow wire.
The logic circuit continuously samples the probes for water. If water is detected, the circuit determines if the condition is transient or permanent. If permanent, the system will be shutdown. Onboard LED’s indicate the condition of the unit at a glance, removing any guess work. Listed to UL 508.
Test Couplings for Residential and Commercial Drain Waste and Vent Systems
Available in 3 inch and 4 inch PVC and ABS for horizontal testing.
The HubSett™ test coupling is a uniquely designed coupling and test device all in one. It replaces other test methods and allows the buildings drain waste and vent system to be connected to the sewer line prior to the initial test.
Once the HubSett™ test coupling has been properly installed and inspected, the entire system maybe covered, allowing the builder to complete all groundwork from sidewalk to landscaping.
Upon passing inspection, the HubSett™ test dome is easily removed with one quick pull on the release cord, allowing water to flow into the sewer. The HubSett? test coupling now functions as any other coupling, and does not need to be removed.
HubSett™ test couplings are available for horizontal testing.
HubSett™test couplings can be pre-assembled in cleanout fittings in the shop prior to taking them to the job site, to save assembly time in the field.
. Reliable . Safe . Saves Money . Easy to Use
. Multiple Applications . 12 ft. Cord
